Skip to main content

Download a holder (Fusion)

GET 
/v1/holders/:id/fusion

Requires Import a tool holder (PATCH /holders/{id}) to have run and its job to have succeeded.

Returns the derived holder as Autodesk Fusion writes one: millimetres, segments nose-first, hyphenated keys.

By default this is a tool library (format=library) that Fusion can import directly. format=document returns the bare holder document the kernel wrote, which carries the same geometry but cannot be imported on its own.

The exported envelope stops at the gauge plane by default: material above it is inside the spindle and cannot collide with anything. Pass trim=false for the complete envelope, including the taper. Both are written by the kernel during the import, so neither is a reshaping of the other. trim=true falls back to the complete envelope for a holder that has no gauge plane to cut at, or whose taper a flip put at the nose.

An unmeasured gauge length is not written as zero. In a library it becomes the sum of every segment height — Fusion's own idiom for a holder whose geometry is its gauge length; in a document the field is omitted, which puts Fusion's own field into manual mode.

Request​

Responses​

The Autodesk Fusion holder definition.